Saul Swag - Single
All of our Saul Swags are genuine Australian-made camping swags made from Australian-made canvas.
Our Canvas is a blend of Cotton and Polyester, this gives it a high strength and is breathable, it is manufactured by the last manufacture in Australia from Australian grown Cotton. (Wax Converters Textile Pty Ltd. Rutherford NSW)
Our generous design means you have the width to be comfortable with plenty of leg room so you don’t have any pressure on your feet or toes. (8.13 m2 of canvas)
Our simple yet effective design eliminates the need for frustrating laces; zippers that catch in your bedding; or Velcro tabs and press studs that easily clog with grass, sand or dirt, and then stop working.
Being a true traditional style Swag this allows you to open/close it up as much as is required due to the weather conditions (hot/col and wet/dry)
All of our fittings are solid brass and marine-grade stainless steel. Zippers can’t handle being rolled tightly, leak when it’s wet, and will eventually break, and we don’t use plastic fittings because they break when stood on or driven over - our swags need to be tough!
The head cover has 6 solid brass eyelets (3 each side) which allows it to be strung up to a sapling to keep you dry, create shade from early morning sun or act as a windbreak. You can still smell the fresh air, and hear and see what goes on outside unlike being in a dome or tent swag.
Our single swags are specifically designed to accommodate our medium weight/density polyurethane foam mattress covered in a 100% cotton material (ticking). Our single mattress is 185cm long by 70cm wide, and 7.5cm (3 inches) thick. The mattress supplied only comes in one size (regardless of swag size) and the cotton ticking colour, the pattern is selected at random. If you prefer, you may source your own mattress, air bed or suitable density/weight foam.
Please note: Mattress is smaller than the Swag body
Approximate Measurements (unrolled flat):
Standard - Body width 1.0m x length 2.10m: Head cover width 1.32m x length 1.0m
Extra Long* - Body width 1.0m x length 2.35m: Head cover width 1.32m x length 1.0m
*Extra length swags are recommended for people over 193cm (6’4”) tall.
Weight:
Including mattress - 7kg
Without mattress - 5kg
A single swag rolls up to be approximately 30cm (12 inches) in diameter. As all of our products are made by hand, there may be a very slight variation in measurements.
Carrying straps included (HPW webbing with a PVC coating)
All of our Saul Swags are genuine Australian-made camping swags made from Australian-made canvas.
Our Canvas is a blend of Cotton and Polyester, this gives it a high strength and is breathable, it is manufactured by the last manufacture in Australia from Australian grown Cotton. (Wax Converters Textile Pty Ltd. Rutherford NSW)
Our generous design means you have the width to be comfortable with plenty of leg room so you don’t have any pressure on your feet or toes. (8.13 m2 of canvas)
Our simple yet effective design eliminates the need for frustrating laces; zippers that catch in your bedding; or Velcro tabs and press studs that easily clog with grass, sand or dirt, and then stop working.
Being a true traditional style Swag this allows you to open/close it up as much as is required due to the weather conditions (hot/col and wet/dry)
All of our fittings are solid brass and marine-grade stainless steel. Zippers can’t handle being rolled tightly, leak when it’s wet, and will eventually break, and we don’t use plastic fittings because they break when stood on or driven over - our swags need to be tough!
The head cover has 6 solid brass eyelets (3 each side) which allows it to be strung up to a sapling to keep you dry, create shade from early morning sun or act as a windbreak. You can still smell the fresh air, and hear and see what goes on outside unlike being in a dome or tent swag.
Our single swags are specifically designed to accommodate our medium weight/density polyurethane foam mattress covered in a 100% cotton material (ticking). Our single mattress is 185cm long by 70cm wide, and 7.5cm (3 inches) thick. The mattress supplied only comes in one size (regardless of swag size) and the cotton ticking colour, the pattern is selected at random. If you prefer, you may source your own mattress, air bed or suitable density/weight foam.
Please note: Mattress is smaller than the Swag body
Approximate Measurements (unrolled flat):
Standard - Body width 1.0m x length 2.10m: Head cover width 1.32m x length 1.0m
Extra Long* - Body width 1.0m x length 2.35m: Head cover width 1.32m x length 1.0m
*Extra length swags are recommended for people over 193cm (6’4”) tall.
Weight:
Including mattress - 7kg
Without mattress - 5kg
A single swag rolls up to be approximately 30cm (12 inches) in diameter. As all of our products are made by hand, there may be a very slight variation in measurements.
Carrying straps included (HPW webbing with a PVC coating)
All of our Saul Swags are genuine Australian-made camping swags made from Australian-made canvas.
Our Canvas is a blend of Cotton and Polyester, this gives it a high strength and is breathable, it is manufactured by the last manufacture in Australia from Australian grown Cotton. (Wax Converters Textile Pty Ltd. Rutherford NSW)
Our generous design means you have the width to be comfortable with plenty of leg room so you don’t have any pressure on your feet or toes. (8.13 m2 of canvas)
Our simple yet effective design eliminates the need for frustrating laces; zippers that catch in your bedding; or Velcro tabs and press studs that easily clog with grass, sand or dirt, and then stop working.
Being a true traditional style Swag this allows you to open/close it up as much as is required due to the weather conditions (hot/col and wet/dry)
All of our fittings are solid brass and marine-grade stainless steel. Zippers can’t handle being rolled tightly, leak when it’s wet, and will eventually break, and we don’t use plastic fittings because they break when stood on or driven over - our swags need to be tough!
The head cover has 6 solid brass eyelets (3 each side) which allows it to be strung up to a sapling to keep you dry, create shade from early morning sun or act as a windbreak. You can still smell the fresh air, and hear and see what goes on outside unlike being in a dome or tent swag.
Our single swags are specifically designed to accommodate our medium weight/density polyurethane foam mattress covered in a 100% cotton material (ticking). Our single mattress is 185cm long by 70cm wide, and 7.5cm (3 inches) thick. The mattress supplied only comes in one size (regardless of swag size) and the cotton ticking colour, the pattern is selected at random. If you prefer, you may source your own mattress, air bed or suitable density/weight foam.
Please note: Mattress is smaller than the Swag body
Approximate Measurements (unrolled flat):
Standard - Body width 1.0m x length 2.10m: Head cover width 1.32m x length 1.0m
Extra Long* - Body width 1.0m x length 2.35m: Head cover width 1.32m x length 1.0m
*Extra length swags are recommended for people over 193cm (6’4”) tall.
Weight:
Including mattress - 7kg
Without mattress - 5kg
A single swag rolls up to be approximately 30cm (12 inches) in diameter. As all of our products are made by hand, there may be a very slight variation in measurements.
Carrying straps included (HPW webbing with a PVC coating)
Canvas Care Instructions
Clean only with cold water and a soft brush - don’t use soap or detergent
Ensure swag is completely dry prior to storing
Do not expose to petrol, oil or solvents
Restore well-worn products with DYNAPROOF
If you would prefer to place an order and pay via direct bank transfer, please fill out our order form here.